DANLERS

 Designed and Manufactured in the UK

Open today from 08:00 - 16:00

+44 (0)1249 443377

Main Menu

PIR Occupancy Switches

The DANLERS range of passive infra-red occupancy switches is designed for the automatic control of lighting, heating, ventilation or air conditioning loads.

The PIR switch will switch on the connected load automatically when an area is occupied, and then switch it off automatically when the area has been vacant for a chosen duration. This has the benefits of reduced energy bills and automatic control. When being used to control lighting, the built-in photocell can be used to keep the lights off on bright days. DANLERS can also supply variants such as 12V, or 24V (a.c. or d.c.). To special order we can also supply volt free outputs for mains, 24V or 12V supplies (including versions with gold contact relays).

+

PIR Occupancy Switches

The DANLERS range of passive infra-red occupancy switches is designed for the automatic control of lighting, heating, ventilation or air conditioning loads.

View Category
+

PIR Occupancy Switch Modules

The DANLERS range of passive infra-red occupancy switches is designed for the automatic control of lighting, heating, ventilation or air conditioning loads.

View Category
+

Short Visit / Exit Mode

This range of passive infra-red occupancy switches is designed for the automatic control of lighting loads with the additional benefit of manual temporary intervention when used with a retractive wall switch (momentary).

View Category
+

Step Down Illuminance

Switches lights ON during occupation. Switches lights to a LOWER ILLUMINANCE (eg 20%) when not occupied.

View Category
+

Daylight Linked Dimming suitable for DALI dimmable ballasts

This DANLERS range of passive infra-red (PIR) occupancy switches with daylight linked dimming (maintained lux level) is designed for lighting loads controlled by DALI (broadcast) dimmable ballasts.

View Category
+

Daylight Linked Dimming for 1-10VDC Ballasts

This DANLERS range of passive infra-red (PIR) occupancy switches with daylight linked dimming (maintained lux level) is designed for lighting loads controlled by 1-10VDC dimmable ballasts.

View Category
+

Daylight Linked Dimming for DSI Ballasts

This DANLERS range of passive infra-red (PIR) occupancy switches with daylight linked dimming (maintained lux level) is designed for lighting loads controlled by either DSI dimmable ballasts.

View Category